Roll label device Stainless steel conveyor
Chassis PLC control system
Self-adhesive labeling machine
A perfect visual effect is achieved in the Labeling Machine. One of them is to avoid the phenomenon of tilting in the labeling part. Before the product is filled, the label is attached, and after filling, the filling and sealing are carried out, and the heating in the sealing process is particularly severe for the label. The closer the label is to the bottom end, the more likely the label is. In practice, almost every manufacturer has similar problems, and the solutions are also diverse.
1) Increase the viscosity of the label and try to make the label stick firmly. To achieve this effect, we need to consider the following aspects:
1 Improve the surface quality of the attached hose. Most of the products have varnish on the surface, which will increase the difficulty of labeling, the oozing of the contents, the micropores of the tube wall, etc., which will cause the label to rise. How to avoid such problems should be considered by everyone. A more important issue.
2 Control the labeling pressure of the label during the labeling process.
3 Control the temperature during the labeling process. Increasing the labeling temperature will improve the labeling effect, as the activity of the internal material will increase as the temperature increases, and the label will be more easily integrated with the tube.
2) Use soft label materials as much as possible, and good label ductility will greatly improve the tilting label.
3) Change the shape of the label for the labeling machine.
Make the bottom end of the label curved and try to avoid the deformation of the seal. Of course, the arc cannot be opened too deeply, otherwise the wrinkles are easily caused by the problem of the label itself, which increases unnecessary trouble. For the special type of sealing, the shape of the label is required to be changed accordingly of the labeling machine, so that not only the tilting can be avoided but also the aesthetics can be increased.
4) Eliminate the effects of static electricity.
The labeling process is prone to static electricity, which will have an impact on the labeling effect. Appropriate improvement of the humidity at the labeling site will be improved. The use of an ion fan is also an effective solution. The labeling machine is equipped with automatic humidity control inside, which can separately control the cleanliness inside the equipment, keep the label away from dust and improve the labeling quality of the product. In this way, there is no longer a phenomenon of tilting in the labeling process, and the visual effect is achieved of the labeling machine.
We have been designing, manufacturing and selling manual, fully automatic and semi-automatic labeling machines. Our range of products is complete and available in both general and special models. The main products are: self-adhesive labeling machine, sleeve labeling machine, Round Bottle Labeling Machine, beer labeling machine, semi-automatic labeling machine, labeling machine, automatic labeling machine, automatic labeling machine, labeling machine, automatic Paste the label machine. These products can be used for flat-paneling, single-sided or multi-faced packaging, cylindrical pasting, partial or full-covering cylinder bonding, dents and corners of the labeling machine.
The service purpose of MAKWELL MACHINERY CO., LIMITED is: customers are God, we will continue to create more high-quality products to serve customers. Professional R&D and production of vacuum emulsifier mixer, bottle filling and capping machine, tube filling and sealing machine, mixer tank, planetary mixer, packaging machine, paint mixer and so on
If you have the above requirements, please contact me:
General manager: Jane jiang